BrainExploder
BrainExploder
  • 342
  • 13 898 871
Scientifically Quiet. Door Silencer Decibel Test. (-20db in 60 seconds).
Decibel test showing a traditional metal strike plate vs the Door Silencer Flexible Strike Plate. The difference will keep you up at night thinking about it but not because the door slammed 3 rooms away.
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors
Also Available on Amazon: amzn.to/3xRkDIx
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors
Also Available on Amazon: amzn.to/3xRkDIx
- Nearly Eliminates All Noise of a Closing Door
- Retains Ability to Latch and Lock Door
- Absorbs Force of Door With Flexible and Durable Construction
- Installs One to One On Existing Doors with No Modifications
- Flexible Ramps Catch The Bolt and Prevent Knocking
- Adds a Touch of Class to Loud Clingy Doors
- Slam Backstop Prevents Door Frame From Banging Into Door Jamb
- Keeps The House Quiet, Great For Sleepers
The door latch strike plate has gone unchanged for over 80 years. It gets the job done but can it be made better? That's what I thought as I was awakened one morning by a slamming door and the Door Silencer was born.
The Door Silencer follows the same principle as a traditional strike plate found on almost every interior door in your house but it one ups it at every step. As the bolt of the door makes first contact with the plate it's a metal on metal clash but not the Door Silencer. Made of noise dampening flexible elastic our design absorbs and deadens the strike. The bolt then rides over a soft surface that doesn't make a scratchy metal sound until it is released into the bolt opening.
Here again we thought it through. Instead of a vast opening for the bolt to unload its pent up spring energy and make another noise, our design ramps down the bolt and at the same time a second flap slows down the descent, almost pinching the bolt as it lowers into the opening.
However we are not done yet, a lot of noise from closing the door comes when the door slams into the door jamb. Here we added a Slam Backstop that adds a pad between the door and the door jamb gently bringing the door to a close.
All combined we have re-tuned the sound a door makes when it closes. It now sounds closer to a luxury automobile door rather than a trash can lid being slammed. And all of this comes at no loss of features. The door can still be latched and locked as per usual and the Door Silencer installs right into your existing door jamb but we also include our own color matched metal screws if you want the strike plate to be both silent and invisible.
Soundproof your house, enjoy better sleep, calmer days and a better life. Open the door into the 21st century and silently shut one on the clunky metal noise of days past.
Fitment
Door Silencer Strike Plate fits existing strike plates measuring 2-1/4" vertically with the screw holes being 1-5/8" apart on center. Door jamb depth is 1-7/16"
Переглядів: 550

Відео

Fanatec CSL DD Shaft Extension Install and Demo
Переглядів 1 тис.3 місяці тому
www.brainexplodermerch.com/product-page/100mm-shaft-extension-for-fanatec-csl-dd-wheel-bases 100mm Shaft Extension for Fanatec CSL DD Wheel Bases If you have the need to add more length to your Fanatec sim racing setup now you can. Maybe you want to have your monitors sit between the base and the wheel for a clear view of the dash, maybe you need to have the wheel closer to you or the base furt...
Sun Visor License Plate Mount (Universal Fit) Installation
Переглядів 3053 місяці тому
BrainExploder Merch: www.brainexplodermerch.com/product-page/sun-visor-license-plate-mount-universal-fit Amazon: amzn.to/4bjah2P A team of designers spent thousands of man hours designing the front of your car to look its best then as an afterthought a license plate is added. It never makes the car look better but it is a necessity in many states. Well now you can have a front facing plate that...
Door Silencer Strike Plate - Hear What All The Noise Is About
Переглядів 1,2 тис.3 місяці тому
Get it at the offical Site: www.brainexplodermerch.com/product-page/door-silencer-strike-plate-flexible-noise-eliminating-solution-for-loud-doors Also Available on Amazon: amzn.to/3xRkDIx - Nearly Eliminates All Noise of a Closing Door - Retains Ability to Latch and Lock Door - Absorbs Force of Door With Flexible and Durable Construction - Installs One to One On Existing Doors with No Modificat...
Camp Speaker Replacement Drawer For Rivian R1T/R1S
Переглядів 1,7 тис.7 місяців тому
Get it here: www.brainexplodermerch.com/product-page/camp-speaker-drawer-for-rivian-r1t-r1s Rivian came up with an awesome feature for the R1T and R1S, the camp speaker. It's always ready to go to the beach and pump out the jams but in reality how often do you use it. I used mine about twice in a year so I figured there is better use for the cavity. The BrainExploder Camp Speaker Drawer Replace...
Tesla CyberTruck caught in the wild on Rivian R1T Drive Cam
Переглядів 7867 місяців тому
Rivian Accessories: www.brainexplodermerch.com/auto Out looking at Xmas lights with the family when I spotted the most unusual lights in my rear view mirror, instantly knew what it was and was excited when I realized Rivian's cams are always rolling. Had Texas plates and car was full of people it seems, green accent glow around the trim (can't see in video). #tesla #cybertruck #rivian
Tow Hook Covers for Rivian R1T and R1S
Переглядів 5907 місяців тому
Available at these fine retailers: www.brainexplodermerch.com/product-page/tow-hook-clam-shell-cover-for-rivian-r1t-r1s amzn.to/3RZ6KiN No blackout job is complete without covering up those glossy silver tow hooks and we've made it an easy process. Our two pieces clam shell design snaps over the top and bottom of either hook and clicks together at the center seam. To make sure the cover can't b...
Rear Bumper Chrome Delete Tutorial for Rivian R1S
Переглядів 4738 місяців тому
Get it here: www.brainexplodermerch.com/product-page/rear-bumper-silver-chrome-delete-rivian-r1t For those looking to stealthify your Rivian R1T or R1S this is a must have. With our kit and some patience you can black out or tone down the silver accents on the rear bumper. The kit is pre-cut ready to go out of the tube. All you really need is a squeegee and a heat gun or hair dryer. The kit is ...
Quad Motor Badge For Rivian R1T/R1S (Original Design)
Переглядів 5159 місяців тому
www.brainexplodermerch.com/product-page/quad-motor-badge-for-rivian-r1t-r1s Quad Motor Badge for Rivian R1T/R1S We love our Rivians because they 'speak softly but carry a big stick' but sometimes you have to let the world know what's under the frame. Our original Quad Motor badge does just that. Inspired by other badging already found on the vehicle this one piece design is meant to look like i...
Rivian R1T/R1S Camp Speaker Replacement Concept
Переглядів 2 тис.Рік тому
Production version is available here: www.brainexplodermerch.com/product-page/camp-speaker-drawer-for-rivian-r1t-r1s
Front Bumper Chrome Delete How To on Rivian R1T or R1S
Переглядів 1,7 тис.Рік тому
Front Delete: www.brainexplodermerch.com/product-page/front-bumper-silver-chrome-delete-rivian-r1t-r1s Rear Delete: www.brainexplodermerch.com/product-page/rear-bumper-silver-chrome-delete-rivian-r1t Bumper Yellow Accents: www.brainexplodermerch.com/product-page/bumper-accent-trim-for-rivian-r1t This mod is a little more difficult than some other stuff I've created but with a little patience an...
Blacking Out Rear Bumper Chrome on Rivian R1T
Переглядів 1,2 тис.Рік тому
Straightforward tutorial on how to blackout or tone down the silver bits on the rear of the Rivian R1T, kit available on the site. Rear Bumper: www.brainexplodermerch.com/product-page/rear-bumper-silver-chrome-delete-rivian-r1t Front Bumper: www.brainexplodermerch.com/product-page/front-bumper-silver-chrome-delete-rivian-r1t-r1s #rivian #rivianr1t #chromedelete
Headlight Halos for Your Rivian
Переглядів 3,3 тис.Рік тому
Available here: www.brainexplodermerch.com/product-page/headlight-color-halos-for-rivian-r1t-r1s Have you ever taken a video of your Rivian and noticed the floating aura of the race track shaped headlight? Well that was the inspiration for this design. We thought it would be fun to add a little color to that already distinct front of the vehicle. With our headlight halos you can compliment the ...
Rivian R1T/R1S Side Marker Delete Kit Install
Переглядів 1,2 тис.Рік тому
Rivian R1T/R1S Side Marker Delete Kit Install
How to Tint Your Sidemarkers (Rivian R1T)
Переглядів 911Рік тому
How to Tint Your Sidemarkers (Rivian R1T)
How to Transform Your Rivian R1T Badges and Logos
Переглядів 1,8 тис.Рік тому
How to Transform Your Rivian R1T Badges and Logos
How To Install Large Vinyl Decals/Pinstripes (Rivian R1T)
Переглядів 730Рік тому
How To Install Large Vinyl Decals/Pinstripes (Rivian R1T)
Vinyl Style Shift For Rivian R1T/R1S 20" AT Wheels
Переглядів 3,9 тис.2 роки тому
Vinyl Style Shift For Rivian R1T/R1S 20" AT Wheels
Sunglass Holders for Rivian R1T/R1S | Custom Colors
Переглядів 1,2 тис.2 роки тому
Sunglass Holders for Rivian R1T/R1S | Custom Colors
Tow Hook License Plate Mount for Rivian R1T/R1S (Quick Detach)
Переглядів 4,8 тис.2 роки тому
Tow Hook License Plate Mount for Rivian R1T/R1S (Quick Detach)
Easiest Rivian R1T Mod Ever
Переглядів 2,7 тис.2 роки тому
Easiest Rivian R1T Mod Ever
Finally a Sniper Rifle You Can Field Right Out Of The Box (Silverback TAC-41)
Переглядів 35 тис.2 роки тому
Finally a Sniper Rifle You Can Field Right Out Of The Box (Silverback TAC-41)
Using the Most Awkward Airsoft Gun | CYMA PP-19 Bizon Gameplay
Переглядів 41 тис.2 роки тому
Using the Most Awkward Airsoft Gun | CYMA PP-19 Bizon Gameplay
Airsofter with night vision literally makes a grown man cry! [Watch till the end]
Переглядів 7 тис.3 роки тому
Airsofter with night vision literally makes a grown man cry! [Watch till the end]
The Mask To Protect The Essentials
Переглядів 33 тис.3 роки тому
The Mask To Protect The Essentials
How It Feels To Chew MP5 Gum
Переглядів 9 тис.3 роки тому
How It Feels To Chew MP5 Gum
MP5 Shoot Good {Going Hard Mix}
Переглядів 6 тис.3 роки тому
MP5 Shoot Good {Going Hard Mix}
The Build: Stubby CA M249
Переглядів 19 тис.3 роки тому
The Build: Stubby CA M249
Perfect Angle GoPro Mount (Fully Adjustable)
Переглядів 12 тис.4 роки тому
Perfect Angle GoPro Mount (Fully Adjustable)
Airsoft Cheater Tells ME To "CALL YOUR F***ING HITS"
Переглядів 25 тис.4 роки тому
Airsoft Cheater Tells ME To "CALL YOUR F ING HITS"

КОМЕНТАРІ

  • @PhuVet
    @PhuVet 11 днів тому

    I'd have to paint it like a big American flag. I'm not putting $140k in guns In a garage...

  • @matthubbard2101
    @matthubbard2101 13 днів тому

    question how do the madcaps do in this, my friend gave me one and it didn't have a mag

  • @RavagHer
    @RavagHer 17 днів тому

    this to me is better than having no front plate or ppl putting those stupid tint/blur coverings on their plates. ur not trying to hide ur plates u just dont want to drill into the front bumper and block air vents...

    • @BrainExploder
      @BrainExploder 17 днів тому

      You are speaking the facts. I once saw a plate on the front of an RX8 covering the entire tiny front grille not sure how that car was not overheating on the side of the road.

  • @davidjurica4071
    @davidjurica4071 23 дні тому

    How is it possible that a gun can be stretch so easily?

  • @PhantomMark
    @PhantomMark 25 днів тому

    fgs man stop offering the camera the parts, it can't focus quick enough, just ends up being a blurry uncool mess that adds nothing. Nice vid apart from that ;)

  • @tyrufawcett5743
    @tyrufawcett5743 25 днів тому

    Hey mate, looking at getting this shotty, i know its been a hot minute since the vid but if you remember.. how did you manage to get consistent readings with the chrono? Ive heard its quite difficult to chrono it without it reading too hot. 😅

    • @BrainExploder
      @BrainExploder 13 днів тому

      I don't recall exactly but it must have passed chrono since I was able to use it at this indoor field which had a sub 350fps limit.

  • @luitzenelzinga7397
    @luitzenelzinga7397 27 днів тому

    Where did you buy it

    • @BrainExploder
      @BrainExploder 21 день тому

      www.brainexplodermerch.com/product-page/100mm-shaft-extension-for-fanatec-csl-dd-wheel-bases

  • @TACOPERATOR17STINGRAY1
    @TACOPERATOR17STINGRAY1 27 днів тому

    What about weaphones???

    • @BrainExploder
      @BrainExploder 13 днів тому

      Available on App Store and Google Play

  • @darthraven118
    @darthraven118 28 днів тому

    SELL THESE

  • @Sgt.RenegadeBaconB
    @Sgt.RenegadeBaconB Місяць тому

    Just get a 50-150 real red dot they are out there and that's what I did

  • @NeoAArmy
    @NeoAArmy Місяць тому

    Do you know a way to attach to the side rail? Looked it up to no avail.

  • @Mdglenn56
    @Mdglenn56 Місяць тому

    Is there a link I could use?

  • @SurajGrewal
    @SurajGrewal Місяць тому

    3:10 Why use a riser? You spoilt it's looks.

  • @Jameel_moayed
    @Jameel_moayed Місяць тому

    I want this Airsoft guns plz

  • @joshodmo1978
    @joshodmo1978 Місяць тому

    Did you notice any lose in torque? Or did it feel wobbly being that much further from the base?

    • @BrainExploder
      @BrainExploder Місяць тому

      None at all. It’s been super smooth and I have not changed anything to adjust to it.

  • @trigger-red-airsoft
    @trigger-red-airsoft Місяць тому

    I love it. First of all the video is pretty calm and relaxing. Don't know why. But second this idea is amazing! Wish this would be available for european door types.

    • @BrainExploder
      @BrainExploder Місяць тому

      What sort of strike plates you guys got going on there? It's tough to design for something I don't readily have access to.

    • @trigger-red-airsoft
      @trigger-red-airsoft Місяць тому

      @@BrainExploder true! But it is hard to describe in a comment section. Look at German Striker plates. They often have two openings by default for door and lock with openings about 65 x 12 mm and 48 x 13,5mm. But I´m not an expert as well. Also, in old buildings they are often glued and not screwed :|. But very nice product you created!

  • @kayleediamond985
    @kayleediamond985 Місяць тому

    No hesiiii

  • @Zer0fuks
    @Zer0fuks 2 місяці тому

    I used to be an airsofter like you, until I took a BB to the knee.

    • @BrainExploder
      @BrainExploder Місяць тому

      The injury you can’t come back from

  • @ChaosBW
    @ChaosBW 2 місяці тому

    YES!!! MORE MICRO PLASTIC FOR THE LANDFILL!!! I LOVE MICRO PLASTIC!!! I HAVE MICRO PLASTIC IN MY PENIS AND MY BALLS AND MY BLOOD!!! WOODEN PARTS?! WHY MAKE THINGS OUT OF WOOD WHEN YOU CAN USE PLASTIC?!

  • @bosa9133
    @bosa9133 2 місяці тому

    Freakin epic video dude!!🤘

  • @Dilann00
    @Dilann00 2 місяці тому

    Where’s the ACOG

  • @SimonASHTON-fp8ws
    @SimonASHTON-fp8ws 2 місяці тому

    Hi, trying to find a supplier to the UK for the Angry Gun stock tube as shown here, anyone help?

  • @kristenmoon4405
    @kristenmoon4405 2 місяці тому

    For my normal airsoft guns, i just run replica optic, but my few high $ airsoft guns, I run real optics. Like on my CYMA M14 EBR, I just have a replica scope, but on my Umbrella Armory OCAW Banshee, I run a real red dot with real steel flashlights / lasers, etc. Just gotta do what makes sense for you and what makes you happy.

  • @PyroGT_Offical
    @PyroGT_Offical 2 місяці тому

    sick setup

  • @fox15jk
    @fox15jk 2 місяці тому

    pls come back to this vid and tell us what the better gun that arrived is, its been 2 years

    • @BrainExploder
      @BrainExploder 2 місяці тому

      Oh snap I left you hanging. It was the ASG Steyer Scout. I shot the video but ran out of energy to make the video. It is awesome though.

    • @fox15jk
      @fox15jk 2 місяці тому

      ​@@BrainExploder thank you so much Iwas really curious

  • @thomasbortolussi2760
    @thomasbortolussi2760 2 місяці тому

    Do you sell a MG-42 optic mount

  • @g148b4
    @g148b4 2 місяці тому

    Finally, a real video meant for me. A poor person couldn't afford to buy an Airsoft and unable to participate in the game.

    • @BrainExploder
      @BrainExploder 2 місяці тому

      Bro get into it. You can start for just a couple hundred bucks.

    • @g148b4
      @g148b4 2 місяці тому

      @@BrainExploder living in third world country ain't that generous lol.

    • @BrainExploder
      @BrainExploder 2 місяці тому

      aww dang sorry to hear that dude :(

  • @dragonsofthesky7459
    @dragonsofthesky7459 2 місяці тому

    Finally one that actually fires a real round

  • @GrayBread762
    @GrayBread762 2 місяці тому

    whats the camera that he is using called?

  • @alantam5473
    @alantam5473 2 місяці тому

    I bought a pack of 5 on Amazon and they are plastic. The plastic one gives more resistance when I close the door without turning the handle, and it now needs a huge push and some luck to be closed. Do you still sell the felt-pad version that you show here in the video?

    • @BrainExploder
      @BrainExploder 2 місяці тому

      New ones are not plastic they are made of flexible and highly durable polymer. We don’t sell the felt variant but we just released a slightly softer option that also incudes some bump stops. It’s the Enhanced Door Silencer. amzn.to/4bfPnkn amzn.to/3VxiObB

  • @simunpetrus3155
    @simunpetrus3155 2 місяці тому

    Çok teşekkür ederim şimdi tüfeğim ve hücum yeleğim ile mahallemdeki camiye gideceğim (namaz kılmak için değil)

  • @mangnusia
    @mangnusia 2 місяці тому

    Almost 20 years ago 😮

  • @mangnusia
    @mangnusia 2 місяці тому

    Damn, almost 10 years ago, but still relevant

  • @cMONoutdoors
    @cMONoutdoors 2 місяці тому

    2+ years and still no airsoft content

  • @CH1BYS
    @CH1BYS 2 місяці тому

    Where did you get the gun rail

  • @J1m._.
    @J1m._. 3 місяці тому

    6:32 DAMN

  • @lolislayer1643
    @lolislayer1643 3 місяці тому

    This might save my sanity... Real talk tho; would getting rubber bumpers alongside these door silencers help or would it be largely redundant?

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Those help if your door is out of square to the frame. If it is all lined up the built in door jamb pad should prevents the wood on wood noise but if the door is uneven a rubber bump where the door first contacts the frame could help.

  • @miguelp.2580
    @miguelp.2580 3 місяці тому

    I still get fog:(

    • @BrainExploder
      @BrainExploder 3 місяці тому

      You take the foam out?

    • @miguelp.2580
      @miguelp.2580 3 місяці тому

      @BrainExploder yes and I only put some retention on the very bottom of the essentials to keep it closer but don't cover the vent holes but after a bit it fogs

  • @ThatMaximaKid
    @ThatMaximaKid 3 місяці тому

    This is dope af

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Thanks my dude, for when you gotta keep that front end clean.

  • @kestermyronsoldmcmanager1273
    @kestermyronsoldmcmanager1273 3 місяці тому

    This is gonna explode, tonight I’m sharing this everywhere. Thank me later

    • @BrainExploder
      @BrainExploder 3 місяці тому

      I’ll thank you now :). Thanks

  • @Jaysnipes
    @Jaysnipes 3 місяці тому

    Update : After purchasing 2 of these. They work like a charm. The doors are A LOT more quieter compared to the metal strike plate. My biggest concern was whether the part that sticks out on the front of the door would keep the deadbolt from being able to reach inside the hole or rather the door not being able to close all the way, but it worked. I would sell these myself if I could cause I don't think enough people know about this, but if they're like me. Silence is golden! They're dying to discover it. Thank you! 💯

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Thanks for the update. Im happy to hear they fit your doors. Each door frame/hole is different but yours worked well and that’s awesome.

    • @Jaysnipes
      @Jaysnipes 3 місяці тому

      @@BrainExploder That's a fact. I have seen other types of doors. Do you plan on creating ones for different types?

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Yeah we are messing around with other types but this is by far the most popular style at least in North America. But the concept is applicable to most variants.

  • @Bigsky1886
    @Bigsky1886 3 місяці тому

    I do this with my Nalgene bottle for work 👍

  • @Jaysnipes
    @Jaysnipes 3 місяці тому

    I love this invention. I just bought one today off Amazon. So, I can't wait to see if it works. I feel like this invention here is the answer to those of us who hate unnecessary noise. Door slamming all day isn't enjoyable. Hush bumps only solve part of the problem but it's the strike plate that's the remaining issue.

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Thanks my guy, hope it works out for you.

  • @aaronrichmond4250
    @aaronrichmond4250 3 місяці тому

    r.p."G". G as in GRENADE....Not rpW 😅😅😅

  • @clevelandaeromotive
    @clevelandaeromotive 3 місяці тому

    Yes. “Helpful video”, in that I know it’s a whole schpiel just to get a GoPro mounted to your tactical helmet.

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Back in the day it was but then I designed a mount that can do all this an more with way less work. www.brainexplodermerch.com/product-page/adjustable-nvg-mount-gopro-style

  • @Michael-wy7om
    @Michael-wy7om 3 місяці тому

    Does it lock?

    • @BrainExploder
      @BrainExploder 3 місяці тому

      No it will stay in place just fine but can be opened with a proper pull.

  • @havoc_airsoft
    @havoc_airsoft 3 місяці тому

    Will these work on the novritch goggles?

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Works with most full sized goggles.

  • @munchon2171
    @munchon2171 3 місяці тому

    Hey, I know this was FIVE YEARS ago but did you guys discontinue your night vision recording system? Posted links don't work.

  • @garenkarapetian709
    @garenkarapetian709 3 місяці тому

    This video is 7 years old. How is this bladder holding up? I heard that bladders in general are susceptible to bursting. Also, how does the water taste from this bladder? is it "plasticy" or normal?

    • @BrainExploder
      @BrainExploder 3 місяці тому

      Haven't used in forever but back in the day it tasted just fine, its a cheap item to replace tho and probably not a bad idea.

  • @DaddyTheSniper
    @DaddyTheSniper 3 місяці тому

    Its the weight of the bbs